Online UPS systems from 1 kVA to 300 kVA in three series — plus inverters, stabilizers, solar systems and batteries. Made in Dadri & Greater Noida.
Every Shivi online UPS uses DSP-based double conversion with a high-frequency PWM inverter using IGBTs, so the load is protected against spikes, surges and brownouts. Choose your series to see the full specification.
Single-phase in, single-phase out. DSP-based double conversion with an in-built isolation transformer, a wide input voltage range and a high input power factor. Parallel redundancy is optional.
| Specification | Alpha · 1 – 15 kVA |
|---|---|
| Input | |
| Nominal voltage | 230 VAC |
| Voltage range | 230 V ±20% |
| Frequency | 50 Hz |
| Output | |
| Voltage | 220 / 230 / 240 V (selectable) |
| Voltage regulation | 1% |
| Total harmonic distortion | 2% |
| Power factor | 0.9 |
| Crest factor | 3:1 |
| Overload (inverter mode) | 110% for 2 minutes |
| DC link | |
| Battery voltage | 120, 144, 180, 192 VDC |
| System | |
| Efficiency (inverter) | Up to 92 – 95% |
| Display | LED + LCD |
| Ingress protection | IP20 |
| Audible noise | 50 dB |
| Environmental conditions | |
| Operating temperature | 0 – 40 °C |
| Storage temperature | −20 °C to 70 °C |
| Relative humidity | 0 – 95% (non-condensing) |
| Maximum altitude | 1000 m without derating |
Specifications are indicative and may be customised. Request a datasheet for the exact ratings of your model.
Three-phase in, single-phase out. In-built isolation transformer, auto re-transfer static switch and manual bypass for single-phase loads on a three-phase supply. Parallel redundancy is optional.
| Specification | Beta · 5 – 100 kVA |
|---|---|
| Input | |
| Nominal voltage | 3Ø, 380 / 400 / 415 V |
| Voltage range | 350 to 460 V |
| Frequency | 50 Hz |
| Input power factor | 0.99 (optional) |
| Output | |
| Nominal voltage | 220 / 230 / 240 V (selectable) |
| Frequency | 50 Hz |
| Power factor | 0.9 |
| Voltage regulation | ±1% |
| Voltage distortion | ≤ 3% |
| Overload | 110% for 2 minutes |
| Crest factor | 3:1 |
| Efficiency (inverter) | Up to 92 – 95% |
| DC link | |
| Battery voltage | 240 V, 360 VDC |
| Voltage tolerance | ±1% |
| Voltage ripple | ±1% |
| Static bypass (optional) | |
| Switching time | Inverter failure: 2 ms · other modes: 0 |
| General | |
| Ingress protection | IP20 |
| Audible noise at 1 m | < 60 dBA |
| Cooling | Forced air |
| Environmental conditions | |
| Operating temperature | 0 – 40 °C |
| Storage temperature | −20 °C to 70 °C |
| Relative humidity | 0 – 95% (non-condensing) |
| Maximum altitude | 1000 m without derating |
Specifications are indicative and may be customised. Request a datasheet for the exact ratings of your model.
Three-phase in and out for heavy loads. In-built isolation transformer, and energy saving mode, with 50 Hz or 60 Hz operation. Parallel redundancy is optional.
| Specification | Gama · 5 – 300 kVA |
|---|---|
| Input | |
| Nominal voltage | 3Ø, 380 / 400 / 415 V |
| Voltage range | 350 to 460 V |
| Frequency | 50 Hz or 60 Hz (selectable) |
| Output | |
| Nominal voltage | 220 / 230 / 240 V (selectable) |
| Frequency | 50 Hz or 60 Hz |
| Frequency synchronisation range | ±1% |
| Power factor | 0.9 |
| Voltage regulation (balanced load) | ±1% |
| Phase displacement (balanced load) | 120° ±1% |
| Voltage distortion | ≤ 3% |
| Overload | 125% for 10 minutes |
| Crest factor | 3:1 |
| Efficiency (inverter) | Up to 93% |
| DC link | |
| Battery voltage | 360 V, 384 V |
| Voltage regulation | ±1% |
| Voltage ripple | ±1% |
| General | |
| Ingress protection | IP20 |
| Cooling | Forced air |
| Environmental conditions | |
| Operating temperature | 0 – 40 °C |
| Storage temperature | −20 °C to 70 °C |
| Relative humidity | 95% (non-condensing) |
| Maximum altitude | 1000 m without derating |
Specifications are indicative and may be customised. Request a datasheet for the exact ratings of your model.
Pick by your incoming supply and the kind of load you need to protect.
| Specification | Alpha1 – 15 kVA | Beta5 – 100 kVA | Gama5 – 300 kVA |
|---|---|---|---|
| Configuration | 1Ø in – 1Ø out | 3Ø in – 1Ø out | 3Ø in – 3Ø out |
| Rating | 1 – 15 kVA | 5 – 100 kVA | 5 – 300 kVA |
| Input voltage | 230 V ±20% | 3Ø 380 / 400 / 415 V | 3Ø 380 / 400 / 415 V |
| Input frequency | 50 Hz | 50 Hz | 50 / 60 Hz (selectable) |
| Output voltage | 220 / 230 / 240 V | 220 / 230 / 240 V | 220 / 230 / 240 V |
| Output power factor | 0.9 | 0.9 | 0.9 |
| Overload | 110% for 2 min | 110% for 2 min | 125% for 10 min |
| Efficiency (inverter) | Up to 92 – 95% | Up to 92 – 95% | Up to 93% |
| Battery voltage | 120 / 144 / 180 / 192 VDC | 240 / 360 VDC | 360 / 384 VDC |
| Isolation transformer | In-built | In-built | In-built |
| Static bypass | Optional | Optional · auto re-transfer switch | Auto re-transfer static switch |
| Parallel redundancy | Optional | Optional | Optional |
Source: Shivi Electronics System product brochure. Specifications may be customised to your requirement.
Everything around your UPS, from one manufacturer. Tell us your load and we will share the exact ratings and pricing.
Pure sine wave backup power for sensitive electronics, with dedicated models for lifts and commercial loads.
Matched to the sensitivity and duty cycle of your equipment, from single-phase electronics to industrial machinery.
Solar-battery-grid systems sized to your roof and your load.
The right battery chemistry for your duty cycle, maintenance appetite and available space.
Share a few details and an applications engineer will call you back, with no obligation.
